Rock Lights or Light Bar on a Budget

$30.00 inc. tax

$30.00 ex. tax

? Tax based on United Kingdom.

You choose either a set of rock lights so you can light up the ground under your crawler to help you choose the right line, or a light bar to blaze the trail ahead!

The rock lights and the light bar are made from sealed LED strips that will run from 3S power (~12 volts).
A light controller lets you operate the lights with a two-position channel.

The lights stick to your rig with the already applied adhesive. My preference would be to use the original adhesive to get the light positioned where you want, then make sure they stay in place with a bit of Shoo Goo or Goop etc.

The light bar attaches with screws or glue using the mounts provided, or make your own!

To try and keep these items as affordable as possible, there is some work involved for the installer. Connectors for the lights and power have been omitted.
Tie all the red wires from the lights together and to the red wire of the light controller. Tie all the black wires from the lights together and to the white wire of the light controller.
Plug the receiver plug into a two-position channel.
Make the connection to a 3S battery to the red and black power wires. My suggestion would be to solder them to the battery connector on your ESC.

NOTE: The wires going to the rock lights will be 10 to 12 inches long.

Product Code: RLB

Product Condition: New

Type

Add to Cart