Displaying results : switch

Have more servos than you do channels? Want to run a remote light switch and a winch but can only plug in one or the other? Maybe you need a Servo Toggle Switch Made using 22 gauge servo wire and a switch with 5 amp contacts! Plug it into a channel on your receiver and then connect the two items that...

A part I have been meaning to introduce for some time now. It's very simple, but I think it might prove helpful on your next build. This is an easy way to get a battery power feed that you can turn on and off with a simple to mount toggle switch. It could be used to power your lighting for those times...

These products will let you turn your rig's lighting on and off from a channel on your remote control. If your lighting gets its power by plugging into your receiver, just plug this Remote Switch into the receiver first, then plug your lighting into it. Then you can flip your lights on and off from your...

Have your vehicle's lighting turn on automatically when it gets dark. This part consists of a power input, a power output, and a light sensor. There is a rotary control that is used to set the light sensitivity so that when it is dark enough, the power to the light is turned on. Order it with pigtail...

This part lets you position a servo just by flipping a toggle switch. Two trim pots lets you set exactly where the servo will park in both of the switch positions. No problem running a high voltage servo as this controller will take 10 volts. Depending on what you need, order this part for selecting...

Ever need to send power from your receiver to more pieces of gear than you have available connections? Maybe this can help! Want to be able to turn these outputs on and off all at once? Order it with the toggle switch option! Need a different size? Just ask. Send me a message to me at: mostlyal @ gm...

If you have crawled for a while and noticed your steering is weaker than you think it should be, it might be due to the often weak BEC that is included in most electronic speed controls. One fix for that is to run an external BEC. Sometimes you don't have the time or equipment needed to solder in an...

MOSFET Winch Controller Maybe you have heard of or experienced first hand what people are calling winch drift or winch creep... Are you running a winch that you made by modifying a servo? A lot of people are finding that the winch tends to drift over time. They might be driving along and suddenly...

This is the brute force method of motor control. These controllers don't have the voltage limitations that the normal winch controllers have! Rather than relying on semiconductor components to take care of power switching, these units make use of relay contacts. This means super low "on" resistance which...