Mindburner TRIG converter
It's actually two separate devices in one.
V trig to S trig
S trig to V trig
DC power is only required for S trig to V trig.
Devices are separate and can be used simultaneously.
Connections are by 6.35mm Mono Jack.
Tip = signal
Sleeve = GND
Some synths like Moog use stereo jacks and the ring connection. So you may need to make up a lead.
Power is via a 2.1mm DC jack. Tip positive.
Use 5-9v even 12 (depending on the required gate voltage for your application)
0.75M USB to DC lead included.
Teisco, Roland, ARP, Sequential Circuits SCI, Oberheim
(e.g. use a SCI Pro one to play a Moog Source)
Korg, Yamaha, Moog
(e.g. use a Moog Source to play a Teisco 60f)
High quality Neutrik connectors
Small form factor 60mm x 100mm
Breakout pads for Trig and Power
LEDs show Trig signal, Red ON for V Trig, Green goes OFF for S Trig
Could be mounted in a blank eurorack panel with a bit of DIY