0 items
Checkout >

TT700 biodiesel processor

TT700 0 product stars

TT700 biodiesel processor Summary

The TT700A biodiesel processor

What this machine will do:

  • Filter waste vegetable oil
  • Heat the vegetable oil
  • Separate water from the oil
  • Safely react the methanol with vegetable oil
  • Separate glycerol from the biodiesel
  • Wash and dry the biodiesel
  • De-wax the biodiesel
  • Pump out high quality biodiesel through a filtration unit




Dimensions of machine: 2445 long by 900 wide by 2120 high (mm)
Chemicals required: Methanol, sodium hydroxide, sulphuric acid. All readily available throughout the UK.


  • Air operated main pump.
  • Air operated mixer (as shown).
  • All in one unit, ready to go.
  • Will produce 380 litres of biodiesel per batch to EN14214.
  • 40 amp heating system.
  • Skid mounted 2445 long by 900 wide by 2120 high (mm)
  • Professionally engineered.
  • Ultra-safe design.
  • The reactors and heating tanks are made from steel, which has high resistance to pressure, good compatibility with all chemicals used and does not go soft at 60 degrees C.
  • The main pipe work is made of steel and is properly supported.
  • The main pump is spark-free, self priming, tolerant of large particles in the oil and resistant to all the chemicals used.
  • There is no need to pre-filter waste oil before going into the machine.
  • The unit is securely mounted on a sturdy platform and cannot be accidentally knocked over in normal operation.
  • There are NO add ons required for this machine, it is all inclusive and ready to go to make high grade biodiesel conforming to EN14214. The machine will accommodate all the stages of the biodiesel process from conditioning and heating the oil to drying and de-waxing the finished product. The methoxide mixer is an optional extra to make this stage easier.
  • The processes used are all well established, employing traditional biodiesel technology with no 'research' techniques or otherwise. It is a fully developed biodiesel processor.
  • The heating tank is fitted with internal 3KW 240 volt a/c stainless steel/incalloy heating elements with thermostats. Importantly, there are no heating elements in the reactor, minimising fire/explosion risk.
  • High quality stainless steel low level sensor prevents immersion heater being switched on accidentally.
  • Methoxide mixing is performed in a proper mixing vessel by adding catalyst to the methanol in the traditional way.
  • Will NOT turn your biodiesel acidic with 'Dry wash' or ionic exchange wash.
  • The processor is capable of making one batch of biodiesel every 24 hours although we recommend longer settling times to achieve highest quality.
  • Yield is normally 95% giving 380 liters in the TT400A.
  • Sight tubes to see fluid levels in the tanks.
  • Sample points on both tanks to determine state of reaction/state of drying etc.
  • Waste vegetable oil compatible - the machine will take water and particles out of the oil prior to the reaction.
  • Biodiesel de-waxing system, preventing vehicle fuel filter problems.
  • Conical tank bottoms to get maximum separation efficiency.
  • Electric circulation pump for drying the oil and drying and de-waxing the biodiesel.
  • Skid mounted.
  • Full, comprehensive, training available plus full, two day, training course on DVD.
  • Please send us your postcode for delivery quote.
  • Spare parts always in stock.
  • Good back-up service in case of problems.

  The 'Twyn Tub' design addresses some serious safety considerations that should be made when making biodiesel. From our extensive research, we have found that the most common accidents are usually a combination of bad design and user error. The main consideration has been to separate the electirc heating elements from the reactor vessel so that there is NEVER an opportunity to turn them on in an empty vessel containing methanol fumes. Many accidents have happened due to having electrical elements in the processor and some are documented HERE.

  Why is this machine safe and not others? Answer: The machine has been professionally designed to minimise the chances of methanol vapour detonation by either spark or very hot metal surfaces. Furthermore, it has been laid out to be very simple to operate.



A deposit of £1200 is required for this machine. A charge of 3.4% extra will by made on paypal payments.

Customer Reviews

No Reviews Posted Yet - be the first!(write review)

Recently Viewed Products

TT700 biodiesel processor

TT700 biodiesel processor

The TT700A biodiesel processor What this machine will do: Filter waste vegetable oil Heat the vegetable...

Free eCommerce Webstore - Sign up today More Info freewebstore
Report this Store
Are you concerned about the security of this store? Please contact our security team via
Is this store safe?
eCommerce Websites
Freewebstore, providing eCommerce for everyone. Visit us today and create your very own eCommerce store - FOR FREE
Are you the Store Owner?
You can remove this banner and have access to our fantastic premium features by upgrading your online store.
Learn More